void loop() Wire.beginTransmission(0x3C); // Start transmission to device address 0x3C Wire.write(0x00); // Send command byte Wire.write(0x01); // Send data byte Wire.endTransmission(); // Stop transmission
float readTemperature() Wire.beginTransmission(LM75_ADDR); Wire.write(0x00); // Temperature register Wire.endTransmission(); wire.h library
void loop() byte error, address; int devices = 0; void loop() Wire
void setup() Wire.begin(); Serial.begin(9600); Serial.println("Temperature Monitor"); void loop() Wire.beginTransmission(0x3C)
#include <Wire.h> void setup() Wire.begin(0x08); // Join bus as slave with address 0x08 Wire.onReceive(receiveEvent); // Register receive handler Wire.onRequest(requestEvent); // Register request handler Serial.begin(9600);