How To Calculate Cable Size — Exclusive & Real

: Voltage drop. For 50 mm², AC resistance at 70°C ≈ 0.494 Ω/km, reactance ≈ 0.088 Ω/km. Three-phase drop: [ V_d = \sqrt3 \times 90.3 \times (0.494 \times 0.85 + 0.088 \times \sin(\cos^-10.85)) \times 0.120 ] sinϕ = 0.527. R term = 0.494×0.85 = 0.4199 X term = 0.088×0.527 = 0.0464 Sum = 0.4663 Ω/km per phase. ( V_d = 1.732 \times 90.3 \times 0.4663 \times 0.120 = 8.74V ) Percent = 8.74/400×100 = 2.18% < 3% OK.

[ I_z = I_ref \times k_temp \times k_group \times k_soil \times k_depth \times k_therm ] how to calculate cable size

: The protective device (circuit breaker or fuse) must satisfy: [ I_b \leq I_n \leq I_z ] Where ( I_n ) = nominal rating of protective device, and ( I_z ) = cable’s corrected ampacity. Additionally, for overload protection: [ I_2 \leq 1.45 I_z ] (Where ( I_2 ) is the current ensuring operation of the protective device, typically 1.3–1.45 ( I_n ) for circuit breakers). 3. Voltage Drop Constraint Excessive voltage drop causes poor equipment performance, increased current, and reduced efficiency. Standards (e.g., IEC 60364, BS 7671, NEC) limit total voltage drop from supply to load to typically 3–5% for lighting and 5–8% for other loads. 3.1 Voltage Drop Formula (AC, single-phase and three-phase) For a single-phase circuit: [ V_d = 2 \times I_b \times (R \cos\phi + X \sin\phi) \times L ] : Voltage drop